Amrotec MiB-9 Operator's Manual page 22

operation will be done if PRINT key is pressed after each deposit count because MIB-9 does not check whether a printer
is connected or not in order to perform this operation.
The Grand Total is managed separately in MIXED and SINGL mode, thus there are two Grand Totals. You can only see
one Grand Total at a time: i.e., in SINGL mode, the display will show only
Grand Total for counts using of SINGL mode.
If operator to check the Grand Total details, press GT key followed by
DISPLAY key. To clear the G. Total, press "C" key. When Grand Total is
cleared, the printing sequence number is also reset to "1". To exit from
Grand Total Display mode, press GT or START/ENTER key.
GT function cannot be activated if ADD is turned On. Please turn off the ADD

function to use GT function.
In Dual-User Mode (if activated), GT cannot be functional.

If the currency is changed to another, all stored Grand Totals will be erased.

22
CAUTION !
Grand Total Detail View