Amrotec MiB-9 Operator's Manual page 36

1. SERIAL SET:
•
AUTO PRINT: Operator can select to automatically
print counting results in a Printer (if one is connected)
when after a count is completed and hopper is
empty out or auto-print per each batch count is
completed or operator can turned off this option to print manually after each count is completed.
•
For available printers, please consult with AMROTEC® or with your sales representative.
Standard "Serial" port configuration for printer is as below:
Speed (Baud Rate)
Parity
Data Bit
Stop Bit
Printer Type
The parameters of an external Dot or Thermal printer should be set as
above value. The Column Length parameter is to be set to the column
length of the printer. To print counting results, press START/ENTER
key on the right side of the Control panel for User1 and numeric '5' (START) key on the left for User2 (See
sub-menu "Dual User" in Section. 6. Basic Operation).To print the Grand Total, press GT to display Grand
Total and press DISPLAY to see Grand Total Detail view.
36
: 9600 bps
: None
: 8
: 1
: Type Normal (Default)