Amrotec MiB-9 Operator's Manual page 34

7. SELECT FIRST VIEW
Operator can select and default preferable view of the main screen from 3 different screen views as illustrated on
the left side diagram. Operator can use ()() key or corresponding
numeric key to scroll and select your selection by START/ENTER key,
however, in discriminating mode, it is strongly suggested that either 1.
SIMPLE VIEW1 (Default) or '3.DETAIL VIEW' should be selected as
the main screen.
8. DUAL USER SET
DUAL-USER is a feature that allows one MiB-9 machine to be shared
by two operators as User1 and User2. This feature is disable from
factory by default, therefore if operator requires to activate this feature,
enter into this Menu item from USER MENU and make your selection
as "DUAL USER ON" and to deactivate, select "DUAL USER OFF".
DUAL USER OFF
When this feature is OFF as by factory default or by operator,
machine operates as for single user. In this configuration, printer or PC is connected to the RS232C port and
USB port is used to connect PC
34
(configuration is subject to change without further notice).