Bootware Submenus - H3C WX3024E Installation Manual

NOTE:
To enter the BootWare menu, you must press Ctrl + B within 4 seconds when the system
•
prompts "Press Ctrl+B to enter extended boot menu".
To enter the BootWare menu after the system software image file is decompressed,
•
restart the switch.
Press Ctrl + B when the system prompts "Press Ctrl+B to enter extended boot menu". Then, the system
prompts you to enter the BootWare password:
Please input BootWare password:
Enter the BootWare password. The system displays the BootWare main menu.
CAUTION:
The initial BootWare password is null.
•
If you fail to enter the correct password three times in a row, the system will be halted
•
and all you can do is to restart the system.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Modify BootWare Password
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Enter your choice(0-9):

BootWare submenus

Serial submenu
Select 2 from the BootWare main menu to enter the serial submenu. The following information is
displayed:
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Serial Interface Parameter
|<0> Exit To Main Menu
7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|