Set Up The Flat-Panel Display And The Smart Board Interactive Whiteboard - Polycom Instructor FS HDX Setting Up

Set Up the Flat-Panel Display and the SMART Board
Interactive Whiteboard
Connect the SMART Board interactive whiteboard
1
to the pen tray. Then, connect the MOD4 cable
that you received with the SMART Board from
the pen tray to the mini RJ-11 socket on the
underside of the SMART Board.
For information on how to do this, refer to the
documentation that you received with the
SMART Board.
Place the SMART Board interactive whiteboard
2
face down on a work bench or table.
Hang the pen tray over the edge of the work
bench or table.

Set Up the Flat-Panel Display and the SMART Board Interactive Whiteboard

9