Table of Contents
Advertisement
About this Guide
This document, Setting Up the Polycom Instructor FS HDX, explains how to
install the various components of the Polycom® Instructor FS™ HDX system,
how to connect the cables, power on the equipment, and perform all the other
steps you need to get the system up and running. This document is intended
for installers who have been trained on how to set up the Instructor FS HDX
equipment.
Because the Polycom Instructor FS HDX contains components from different
manufacturers, you may have to refer to other documents during the set-up
process. This document will describe the steps you need to take and, if
necessary, tell you where to look for additional information.
Most of the other documents that you'll have to refer to are included with your
Polycom Instructor FS HDX, either as printed documents, available through
the CDs that come with the system, or as online help files. These documents
include:
•
Polycom Polycom Instructor FS HDX Quick Reference
•
Polycom Setting Up the HDX™ 9001/9002 System
•
Polycom Administrator's Guide for Polycom HDX Systems
•
Polycom User's Guide for Polycom HDX Systems
•
Polycom Instructor Tools Toolbar online help
•
SMART™ Board Interactive Whiteboard Installation Guide for Flat-Panel
Displays
•
SMART Board software online help
•
Installation and User's Manual for the display
You can also find most of the Polycom documents at
www.polycom.com/videodocumentation.
For support or service, please contact your Polycom distributor or go to
Polycom Support at www.polycom.com/support.
iii
Advertisement
Table of Contents
