Table of Contents
Advertisement
Route the cables through the holes in the
11
display support bracket as shown in the
illustration.
Note
The 9-pin serial cable connects to the
PC. Depending on where you locate the
PC, you may or may not want to route
this cable through the holes in the
display support bracket.
The SMART Board interactive whiteboard ships
12
with two power cables. Connect these two
cables to each other. Then, route the cable
through the holes in the back of the display
support bracket as shown in the illustration.
Set Up the Flat-Panel Display and the SMART Board Interactive Whiteboard
13
Advertisement
Table of Contents
Need help?
Do you have a question about the Instructor FS HDX and is the answer not in the manual?
Questions and answers