Table of Contents
Advertisement
Connect the Power Cables
1
Place a power strip at the bottom of the Media
Center.
Connect the power cable (that you connected in
2
step 8 on page 12) from the power connector
on the bottom of the flat-panel display to the
power strip.
Connect the power cable (that you connected in
3
step 11 on page 13) from the power connector
on the bottom of the SMART Board interactive
whiteboard to the power strip.
4
Connect the HDX power cable from the
HDX 9002 to the power strip.
Connect the Power Cables
21
Advertisement
Table of Contents
Need help?
Do you have a question about the Instructor FS HDX and is the answer not in the manual?
Questions and answers