Set Up The Pc - Polycom Instructor FS HDX Setting Up

Setting Up the Polycom Instructor FS HDX

Set Up the PC

Set up your PC as described in the documentation
1
that came with the PC. You should connect the PC
to the LAN; however, do not connect the PC to a
power outlet at this point in the installation.
The PC is required to have:
• Windows 2000 Service Pack 3 or Windows XP
Service Pack 2
• Two available serial ports or one available
serial port and an available USB port
Connect the 9-pin serial cable (that you
2
connected in step 8 on page 12) to the
Com 1 serial port on the PC.
3 Connect the VGA cable from the input port on
the VGA splitter to the VGA output port on
the PC.
20