Connectors And Cables - 3DHISTECH Pannoramic 1000 User Manual

Pannoramic 1000 3.0.2 – User's Guide
3. Audio in/out (3.5mm Jack ports)
4. Power on/off button
5. Power supply connector
6. 6× USB port
7. Network ports
8. Dedicated USB-card for CAN communication and preview camera
9. Monitor port
10. CoaXPress Coaxlink Quad (for Adimec camera)

2.2 Connectors and cables

Control – USB cable (between scanner and control computer)
•
Preview camera – USB cable (between scanner and control computer)
•
Adimec – CoaXPress cables (between Adimec camera and control computer)
•
Video cable (between monitor and control computer)
•
Power supply cable (between 230V/110V and monitor)
•
Power supply cable (between 230V/110V and control computer)
•
Power supply cable (between 230V/110V and power supply unit)
•
Only connect external devices to the Pannoramic® 1000 Scanner that
are safety extra low voltage (SELV) rated to avoid the risk of electrical
shock.
9/9/20
Warning!
3DHISTECH Ltd.
2 Installation
25(74)