Front Impact Bar - Porsche 911 GT3 Cup MR Gen. II Technical Manual

5.4 Front Impact Bar

► The standard front impact bar of the base vehicle has to be redesigned for use in the 911 GT3 Cup
MR Gen.II. The position and length of the towing eye mount must be adjusted.
The attachment points of the bumper on the body remain unchanged.
NOTE
The corresponding tightening torque can be found in the illustration
opposite.
The bumper is manufactured exclusively by Manthey-Racing GmbH.
NOTE
Alternatively, the bumper of the 911 GT3 Cup (991.1) with part num-
ber 9915051218B can be used.
Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
BODY EXTERIOR | Front Impact Bar
33 Nm
33 Nm
33 Nm
33 Nm
48
Home