Porsche 911 GT3 Cup MR Gen. II Technical Manual page 79

Display Page: "WARMUP"
► The "WARMUP" display page is only available when the vehicle is stationary. The primary function
of this page is to be used as a monitoring page during the vehicle's warm-up phase. The advantage
here is that the temperature values are made easy to read from outside the vehicle. The coloured
bar scales under the termperature values assist with this.
❶ The water temperature value is displayed on the left side of the screen. Values from 0°C to 120°C
are displayed.
The bar scale shows temperature values from 60°C. The following temperature ranges are shown
with the corresponding colours:
Temperatures from 60°C to 79°C  Yellow Bar scale  Below optimal temperature range
Temperatures from 80°C to 85°C  Green Bar scale  Target temperature reached
Temperatures from 86°C to 100°C  Yellow Bar scale  Above optimal temperature range, Risk
Temperatures from 101° to 120°C  Red Bar scale  Danger of overheating - Switch off the
❷ The engine oil temperature value is displayed on the right side of the screen. Values from 0° to
120°C are displayed.
The bar scale shows temperature values from 60°C. The following temperature ranges are shown
with the corresponding colours:
Temperatures from 60°C to 79°C  Yellow Bar scale  Below optimal temperature range
Temperatures from 80°C to 85°C  Green Bar scale  Target temperature reached
Temperatures from 86°C to 100°C  Yellow Bar scale  Above optimal temperature range, Risk
Temperatures from 101° to 120°C  Red Bar scale  Danger of overheating - Switch off the
Version V2, 08/2020
of overheating!
engine. Danger of damage to engine!
of overheating!
engine. Danger of damage to engine!
Porsche 911 GT3 Cup MR Gen.II
ELECTRICS | Intelligent Color Display (ICD)
❶
Home
❷
79