Porsche 911 GT3 Cup MR Gen. II Technical Manual page 46

Optional Accessories
Air Jack System -
► Manthey-Racing offers a TÜV-tested compressed air bottle with a 3 meter hose, pressure gauge
and trolley for operating the air jack system.
► A second level for the air jack supports is available to make working under the vehicle easier.
Never exceed the maximum working pressure of 35 bar. The hose line
WARNING
could burst!
In order to prevent damage to the pressure gauge during transport, it
ATTENTION
should be dismantled and stored safely. Damaged or defective pres-
sure gauges must be replaced immediately.
Always park the bottle trolley securely and secure it against falling
ATTENTION
over.
The compressed air bottle is subject to German TÜV regulations. The
NOTE
regular inspection is the responsibility of the operator.
The optional second level for the air jacks may only be used on firm
WARNING
and level ground.
Additional securing when working under the raised vehicle is strongly
recommended.
Accident prevention is the responsibility of the operator / user.
If you have any questions about the optional accessories for the air jack
system, please contact: sales@manthey-racing.de
Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
BODY EXTERIOR | Air Jack System
46
Home