Porsche 911 GT3 Cup MR Gen. II Technical Manual page 105

Lookup Tables - Light_Color_left
► The colours of the LEDs can be set in the "Light_Color_left" tab for the left headlight.
► The colour values specified in the comment field can be set. In addition, a further differentiation can
be made via the light frequency (static, slow flashing, medium flashing and fast flashing).
Procedure for setting the colour of the Color ID when crossing of the timing signal, and the Color ID
upon activation of the Pit Speed Limiter.
Enter in Row 0 the necessary value for the desired colour/flash frequency of the Color ID when

crossing the timing signal.
Enter in Row 1 the necessary value for the desired colour/flash frequency of the Color ID when

activating the Pit Speed Limiter.
All possible settings for the colour/flash frequency are listed in the
NOTE
If the preset values are changed, the setup with the new values must
NOTE
be transferred to the ICD using the "Send Setup" button. All data still
stored on the ICD will be lost when the changed setup is transferred!
Version V2, 08/2020
In the example above, following setup has been applied for the left headlight;
Row 0 (ColorID after Timing Signal) Value Entered: 23  LEDs flashing green quickly.
Row 1 (ColorID in Pit Speed)  Value Entered: 41  LEDs flashing purple slowly.
Porsche 911 GT3 Cup MR Gen.II
ELECTRICS | Intelligent Color Display (ICD)
Home
105