Trunk Lid - Porsche 911 GT3 Cup MR Gen. II Technical Manual

5.7 Trunk lid

► Weight-optimized trunk lid made of fiber composite material (CFRP) with a round cutout for
refueling when the lid is closed.
► Large flow-optimized air outlets for the hot air from the central water radiator.
► Two openings for the fresh air supply to the passenger compartment.
An improperly closed trunk lid can open, tear off and hit the wind-
WARNING
screen while driving.
► Push the lock pins completely through the studs and lock them carefully.
Damaged locking pins must be replaced. The bolts must be checked
NOTE
for damage and firm seating as part of the vehicle preparation.
In wet conditions, the two air intakes for the fresh air supply to the
NOTE
passenger compartment should be closed. Failure to do so may result
in water entering the passenger compartment.
Only one standard hood lift may be installed. The trunk lid is attached
NOTE
to the standard hinges using the standard M6 collar nuts.
10 Nm
Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
BODY EXTERIOR | Trunk lid
51
Home