Get/Test/Send Functions - Datalogic C-BOX 400 Installation Manual

INSTALLATION
2.8.1

GET/TEST/SEND Functions

The C-BOX 4X0 has three internal function buttons. In the C-BOX 410, these three
buttons are also available on the cover and their function is indicated on the display.
The GET/TEST/SEND function is not compatible with Matrix readers.
NOTE
The procedure to enable the GET/TEST/SEND function is the following:
1. Press both the buttons left and right at the same time for at least one second;
the warning LED is turned ON.
2. Release the buttons.
3. Press the left button corresponding to the GET function, the center button
corresponding to the TEST function or the right button corresponding to the
SEND function.
C-BOX 4X0
GET TEST
C-BOX 410
Figure 14 – Internal Function Buttons
SEND
2
19