Safety Precautions; Power Supply; Safety Notes - Datalogic C-BOX 400 Installation Manual

SAFETY PRECAUTIONS

POWER SUPPLY

ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
- This product is intended to be installed by Qualified Personnel only.
The C-BOX 4X0 is intended to be supplied either by a UL Listed NEC Class 2 power
source, or a UL Listed ITE Limited Power Source (LPS), rated 10-30 V dc, minimum
0.5 A.
See par. 2.4.1 for correct power supply connections.

SAFETY NOTES

Observe the general rules for DeviceNet components when planning the C-BOX
installation.
Observe the guidelines in the DeviceNet specifications. DeviceNet is a trademark of
Open DeviceNet Vendor Association, Inc. (ODVA). Please refer to ODVA
(www.odva.org) for further details.
Please observe the following to avoid risk to personnel and damage to equipment
and to ensure that the C-BOX 4X0 functions correctly:
Safety Regulations
Bus Cable
Cable Lengths
Observe the guidelines in the VDE 0100 regulations for
handling electrical components,
Observe the applicable safety and accident prevention
regulations.
The C-BOX must only be installed or uninstalled by
qualified technical personnel with appropriate electro-
technical qualifications.
Bus wiring should only take place using DeviceNet cable.
The high data transfer rates can only be guaranteed with
the correct cable type.
Refer to the manual for the DeviceNet master and to the
ODVA documentation for information on maximum cable
lengths for DeviceNet.
ix