Table of Contents
Advertisement
2
Figure 17 – WinHost Configuration Menu for C-Box 4x0
6.
Return the Configuration Switch to the Normal Operation position.
2.9.2
Matrix Reader Configuration Using VisiSet™
After performing C-Box 4x0 configuration as described in the previous paragraph, the
Matrix reader can be configured through the C-Box 4x0 9-pin internal connector
connected to the PC using the VisiSet™ configuration program:
1.
Run the VisiSet™ configuration tool and select Connect to communicate with
the Matrix reader;
2.
Configure the reader and save the configuration;
3.
Select Disconnect and close the VisiSet™ configuration tool;
4.
For Matrix-2000™ the configuration is complete, close the C-BOX 4x0.
For Matrix-1000™ follow the instructions in the following paragraph to complete
the configuration.
24
C-BOX 400/410
Advertisement
Table of Contents
