Table of Contents
Advertisement
18
Set Up the System
The Setup Wizard appears upon initial startup to
step you through system configuration (see
Figure 54). Before you begin to set up the system:
• Know the service provider and associated
satellite(s)
• Check the latest software version (see below)
• Verify all system components are connected
Update Software and Satellite Library
Before you start the Setup Wizard, update the
system software and satellite library to the latest
versions. Use the KVH TracVision TV-series app,
or follow these steps to use a laptop PC that has
the latest update files downloaded to it from the
KVH Partner Portal (www.kvh.com/partners).
a. Select Exit in the Setup Wizard page. The web
interface appears.
b. At the Updates page of the web interface,
select the antenna model. Then select Install
Update (see Figure 55). Find the .kvh file in
your downloads folder, then double-click to
install.
c. Wait for the update to complete. It may take
up to 45 minutes. The TV-Hub's lights will
alternate orange while the update is in
progress. Once complete, the web interface
will report that the latest version is installed.
d. When the software update is complete, select
the Satellite Library. Then select Install
Update. Find the .xml file in your downloads
folder, then double-click to install.
e. Close the web interface. Then reopen it (see
"Access the Web Interface" on page
Setup Wizard will reappear since setup has
yet to be completed.
f. Select Proceed with Setup Wizard.
Figure 54: Setup Wizard Welcome Page
Figure 55: Software Updates Page
30). The
33
Advertisement
Table of Contents
