Table of Contents
Advertisement
A
Continued
Registering the New LNB
Follow the steps below to register the new LNB
with the antenna.
1. Connect your computer or mobile device to
the TV-Hub and access its web interface.
Refer to
"Access the Web Interface" on page
30
for details.
2. If you have not already done so, update the
system software to the latest version. Refer to
"Set Up the System" on page 33
3. At the Settings page of the web interface, set
Technician Mode to On (see Figure 67
4. From the LNB Type drop-down menu,
choose Stacked Circular (see Figure 68
click Select.
5. The TV-Hub will confirm that you want to
change the LNB type. Click OK to confirm
the change.
6. At the General Settings page of the web
interface (go to Settings > General Settings),
run the Setup Wizard to select satellites and
service.
7. Test the system for normal operation. If there
is a problem, contact KVH Technical Support.
The procedure is complete!
40
Installing a Circular LNB
Figure 67: Technician Mode
for details.
Figure 68: LNB Type Drop-Down Menu
).
).
Then
Advertisement
Table of Contents
