Isolators; General - York YCAL Series Installation Operation & Maintenance

FORM 150.66-NM3
ISSUE DATE: 09/25/2020
WEIGHT DISTRIBUTION AND ISOLATOR MOUNTING POSITIONS

General

Weights of specific chiller models vary significantly as
options are added. As a result, total weights, weights at
individual isolator positions, and actual isolator selec-
tion at each position cannot be published due to the
vast number of possible combinations. This informa-
tion will be available when the specific chiller/ option
selection is made from the local Johnson Controls sales
office. Be aware, weights will change with each op-
tion along with possible isolator changes. Weights and
isolators may need to be recalculated when the option
selections are changed.
Order No: 051138540701
Line No: 1
0
X DISTANCE
LOCATION
INCHES (MM)
R1 135.01 (3429.3)
L1 9.79 (248.7)
R2 135.01 (3429.3)
L2
9.79 (248.7)
SAMPLE PRINTOUT SUPPLIED IN THE ISOLATOR PACKAGE AND IN THE CHILLER PANEL LITERATURE PACKET.
JOHNSON CONTROLS

ISOLATORS

Approximate Isolator Locations
L2
L1
TOP VIEW
0
Y
X
Y DISTANCE
INCHES (MM)
1.09 (27.7)
1.09 (27.7)
89.16 (2264.7)
89.16 (2264.7)
Whenever the isolator option is ordered, the isolators
will be shipped loose with the chiller. Packed with
the isolators and also in the control panel informa-
tion packet is a drawing and table specifically for each
chiller, based on the option selection. The drawing
and table will be similar to the ones shown below. The
drawing will show the isolator locations along with the
weight in pounds and kilograms at the specific loca-
tion, isolator position, and location measurements for
each isolator.
Unit Shipping
Weight
(Display on unit
data nameplate)
R2
R1
VENDOR NUMBER
CIP-B-1000 / Blue
CIP- B-1650 / Black
CIP-B-1000 / Blue
CIP-B- 1250 / Gray
SECTION 6 - TECHNICAL DATA
kg lb
1564 3448
OPERATING WEIGHT
726 (329.3)
1113 (504.9)
648 (293.9)
993 (450.4)
93
6