York YCAL Series Installation Operation & Maintenance page 80

SECTION 6 - TECHNICAL DATA
1213
1192
ALUMINUM
CENTER OF GRAVITY (mm)
YCAL
X
0045 1503.5
NOTE: All dimensions are in mm unless specified otherwise.
NOTE:
Placement on a level surface free of obstructions (including snow, for winter operation) or air circulation ensures rated performance, reliable
operation, and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable airflow
patterns and possible diminished performance. YORK's unit controls will optimize operation without nuisance high-pressure safety cutouts;
however, the system designer must consider potential performance degradation. Recommended minimum clearances: front to wall – 2m;
rear to wall – 2m; cooler end to wall – 1.2m; coil end to wall - 2m; top – no obstructions allowed; distance between adjacent units – 3m.
No more than one adjacent wall may be higher than the unit. 1" nominal deflection isolators (not shown) will increase overall unit height by
152mm.
80
DIMENSIONS - YCAL0045 (SI)
171
82
22 TYP.
100
VIEW B-B
BOTTOM OF PANEL
LIQUID OUT
2292 BASE WIDTH
LEFT END
Y
1105.5
LIQUID IN
76 VICTAULIC (typ)
1146
YCAL
0045
FORM 150.66-NM3
ISSUE DATE: 09/25/2020
ELECTRICAL ACCESS
PANEL
252
401
321
COPPER
CENTER OF GRAVITY (mm)
X
1605.9 1109.7
JOHNSON CONTROLS
879
Y
LD10975