ensto ECO16BT Installation And Operating Instructions Manual page 19

9. Figures
1. Connection diagram
2. Connecting wires to the thermostat
3. Assembling and disassembling
4. User interface
5. Limitation of adjustment range
6. Calibrating the adjustment knob
7. Commissioning the Ensto Heat Control application
8. Pairing the thermostat with your mobile device
9. Ensto Heat Control Home display
10. Reset the factory settings
11. Replace the battery
10. Warranty
The warranty period for Ensto ECO thermostats is 2 years from the date of purchase but no longer than 3
years from the date of manufacture. Warranty conditions, see the product card www.ensto.com.
11. Environmental Aspects
The product's cardboard packing is suitable for recycling.
When a heating system is at the end of the life cycle the cables, conduits and electronic compo-
nents must be disposed of properly according to local recycling guidelines.
12. Declaration of Conformity
Hereby, Ensto Finland Oy declares that the radio equipment ECO16BT is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.ensto.com.
RAK121 / © Ensto 2018
19