Festo DGEA Series Operating Instructions Manual page 51

DGEA−...
15 General technical specifications
Aspect
Operating mode
Permitted temperature range
Storage
Operating environment
Mounting position
End position cushioning/protection
Protection class
Feed rate constant
Max. permitted speed
Repetition accuracy as per DIN 230, part 2
R={− 3s, + 3s}
Drive type
Toothed belt spacing
Max. perm. feed force of the toothed belt
Tightening torques for the cover screws
Max. permitted dynamic loading of the
guideway:
Fy max, Fz max
Mx max
My max
Mz max
Max. perm. driving torque at the drive shaft
(not for right−angle gear units)
Festo DGEA−... 0501a English
DGEA−18−... DGEA−25−...
Cantilever operation (= yoke mode)
0 ... +40 °C
−10 ... +60 °C
As desired
Integrated buffer for very slight cushioning energy
81 mm/rev
± 0.05 mm
Stepping motor, servo motor
(in some cases including gears or brake)
3 mm
230 N
5.3 Nm
2000 N
19 Nm
94 Nm
65 Nm
3 Nm
DGEA−40−...
IP20
120 mm/rev
3 m/s
5 mm
400 N 1000 N
9 Nm
3080 N 7300 N
28 Nm 133 Nm
230 Nm 665 Nm
160 Nm 460 Nm
5.2 Nm 19 Nm
51