Starting A Function - Whirlpool RBD277PD Use And Care Manual

l
When showing the time of day,
the
display will show the hour and minutes.
l
When you are using the Minute Timer,
the display will show hours, minutes, and
seconds in the following sequence:
- For settings from 1-59 minutes,
the
display will count down each second
(minutes and seconds displayed).
- For settings 1 hour or over,
the display
will count down each minute (hours and
minutes displayed).
l
When you are using Cook Time and/or
CID
Stop Time,
the display
COOK
STOP
will show cooking time
TIME
TIME
counting down.
- For settings from 1-59 minutes,
the
display will count down each second
(minutes and seconds displayed).
- For settings 1 hour or over,
the display
will count down each minute (hours and
minutes displayed).
Command pads
The command pads tell the oven what to do
and in what order.
Some command pads have an Indicator
Light. The Indicator Light comes on when
you press the command pad. The ON
Indicator Light comes on when you press
the Start/Enter pad for an oven function.
Selecting an oven
(double ovens)
To choose the oven you want to use, press
Using the control lock
The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK,
TIMER SET/OFF, and LIGHT).
NOTES:
l
Control lock
is only available when oven
is not in use or control has not been set.
l
Set
control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will sound
and "Lot" and fi will appear on the
temperature display. When the
control is locked, 'START?" will
appear on the display if you press any
command pad.
To unlock the control panel:
nd hold the Start/Enter pad for
5 seconds. A single tone will sound
and "Lot" and fi will disappear
from the temperature display.
Starting a function
After programming a function, you must
press the Start/Enter pad to start
the function. If you do not press
the Start/Enter pad within
5 seconds of programming,
"START?" will show on the
display as a reminder.
9