The Oven Lights - Whirlpool RBD277PD Use And Care Manual

Electric built-in thermal-convection ovens
Hide thumbs

Advertisement

Table of Contents
PART
WHAT TO USE
HOW TO CLEAN
Oven door glass
Paper towel and spray
l
Make sure oven is cool.
glass cleaner
l
Follow directions provided with the
OR
cleaner.
Warm, soapy water and
l
Wash, wipe with clean water, and dry
a nonabrasive,
plastic
thoroughly.
scrubbing pad
Oven cavity
Self-Cleaning
cycle
l
See "Using the Self-Cleaning
Cycle" on
pages 33-40.
The oven lights
The oven lights will come on when you open
the oven door. To turn the lights on when
the oven door is closed, press the Oven
Light Pad non
the control panel.
Electrical Shock Hazard
l
Make sure oven and light bulb are
cool and power to the oven has been
turned off before replacing the light
bulb.
.The light cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures.
Because the light
cover is made of glass, be careful not
to drop it.
Failure to follow the above could result
in electrical shock, burns, or injury from
broken glass.
To replace
an oven
light:
1. Disconnect
appliance at the main power
supply.
2.
Remove
glass light cover by grasping
rear or back edge of cover and pulling it
away from the side wall of the oven.
3.
Remove
the light bulb from its socket.
Replace
the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
4. Replace
the light cover by snapping it
back into wall.
Reconnect
appliance at
main power supply.
NOTE:
The oven lights will not work during
the Self-Cleaning
cycle.
42

Advertisement

Table of Contents
loading

  Related Manuals for Whirlpool RBD277PD

This manual is also suitable for:

Rbd307pdRbs277pdRbs307pd

Table of Contents