Troubleshooting; Requesting; Assistance - Whirlpool RBD277PD Use And Care Manual
Electric built-in thermal-convection ovens
Hide thumbs
Also See for RBD277PD:
- Use and care manual (52 pages) ,
- Use and care manual (52 pages) ,
- Manual (59 pages)
Table of Contents
Advertisement
Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of
any kind. Check the lists below and on the next page before calling for assistance or service.
If you still need help, see "Requesting
Assistance or Service" on page 45.
If nothing
operates,
check
the following:
Is the oven wired into a live circuit with the proper voltage?
(See Installation
Instructions.)
Have you blown a household fuse or tripped a circuit breaker?
Other
possible
problems
and their
causes:
PROBLEM
The oven will not
operate
CAUSE
l
You have not set the electronic control correctly. Refer to the
section in this manual describing the function you are
operating.
l
You have accidentally
set the control lock. See "Using the
control lock" on page 9.
l
You have programmed a delayed start time. Wait for the start
time to be reached or cancel and reset the controls.
The Self-Cleaning
cycle will not
operate
Display is blank
l
You did not press the Start/Enter pad.
l
You have programmed a delayed start time. Wait for the start
time to be reached or cancel and reset the controls.
l
You have set the display not to show the clock time. To see
the clock time again, press and hold the Clock pad for 5
seconds.
continued on next page
43
Advertisement
Table of Contents
