Starting A Function; Canceling A Function - Whirlpool RBD277PDB4 Use And Care Manual

Command pads
The command pads tell the oven what to do
and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on when
you press the Start/Enter pad for an oven
function.
Selecting an oven
(double ovens)
To choose the oven you want to use, press
the Upper Oven or Lower
Oven pad.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK and
TIMER SET/OFF).
NOTES:
• Control lock is only available when oven
is not in use or control has not been set.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will
sound and "Loc" and _1 will appear
on the temperature display. When
the control is locked, "START?"
will appear on the display if you
press any command pad.
To unlock the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will
sound and "Loc" and _ will disap-
pear from the temperature display.
Starting a function
After programming a function, you must press
the Start/Enter pad to start the
function. If you do not press the
Start/Enter pad within 5 seconds of
programming,"START?" will show
on the display as a reminder. The
control will return to time of day mode after
5 minutes if Start/Enter is not pressed.
Canceling a function
The Off/Cancel pad will cancel any function
except for the Clock
and Timer Set func-
tions. When you press
the Off/Cancel pad,
the display will show
(single (double
ovens) ovens)
the time of day or, if
Minute Timer is also
being used, the time remaining. To cancel
the Minute Timer see page 11.
8
NOTE: You may hear a fan blowing in the
oven even after you press the Off/Cancel
pad. This is the cooling fan. It will turn
offwhen the oven cools to a certain
temperature.