ESAB Origo Arc 250 edw User Manual And Spare Parts page 27

Engine driven welder for welding with stick electrodes and tig in direct current dc and a generator of electrical current

Table of Contents

Available languages

Protect the machine from rain and do not put it in a location where there is danger of

flooding. Water infiltration can cause short circuits, which can be dangerous for persons

and can damage the machine.

The degree of protection, of the machine is written the rating plate and in this

manual at the "Technical Data".

Make sure that the machine does not move during operation.

Before moving the machine turn off the engine and disconnect all cables, which could

impede the move.

If the surface is not level be sure that the angle of the machine does not exceed the

values shown in the drawings below.

4.2.2 Ventilation

Use in open space with fresh air flow or vent exhaust gases, which contain the deadly

carbon-monoxide, away from the work area.

Assure that the hot air and/or exhaust gas from the machine are vented and are not

recirculated in the machine. Hot air and/or exhaust gas which is recirculated wll cause

overheating of the machine and poor combustion in the engine.

Right

Wrong

- 27 -

Table of Contents

Chapters

Table of Contents