Ribao BCS-160 User Manual page 35

BCS-160User Manual V1.6
By following the indicative message on the screen, press ENTER key to
confirm. After restoring successfully, it will display the messages "Default
setting is OK!", shown as Fig.44. Press ESC key will quit to the previous menu.
8.5.7 CIS calibration
Under Fig.36 interface to choose item 7. CIS calibration and press ENTER
key to confirm. After inputting the passwords 0508, it will come into the
following interface, shown as Fig.45:
Fig.42
Fig.43
Fig.44
35 / 57