BCS-160User Manual V1.6
6.2 Currency Setting
*Note:Before counting please check the currency code area and
confirm is the currency is correct, if not, please adjust the currency
according to below instructions(take USD for example).
Press
Fig.3
Fig.3
Under currency selection interface, move the arrow key to move the cursor
to select the currency, press ENTER key to save the setting and return to main
interface; if press ESC key, then it will not save the setting and return to main
interface.(Fig.4 is to select the currency to be USD)
If the machine you ordered is with single currency, then it is not possible to
select currency.
6.3 Counting Modes Selection
Press
mode the machine will operate under default setting, the modes order is
MIX->SD->CNT as Fig.5 shows, if default setting needs to be adjust please refer
to User Setting.
key to enter into currency selection mode, check
key to switch 3 counting modes in circle. Under every
14 / 57
Fig.4