Ribao BCS-160 User Manual page 36

BCS-160User Manual V1.6
Before you begin the CIS calibration, please make sure you have inserted
the calibration paper correctly, otherwise it will cause problem. The calibration
paper must cover the whole CIS sensor.
8.5.8 IP address setting
Under Fig.36 interface to choose item 8. IP setting and then press ENTER
key to come into the following interface and then set the IP address by pressing
the numeric keys:
8.5.9 Port Setup
Move the cursor to Fig.36 choose No.9 and press ENTER to enter into
Peripheral Devices Setting as below picture, you can choose to connect with
Printer or PC through RS232 port
Fig.45
Fig.46
Fig.47
36 / 57