Ribao BCS-160 User Manual page 56

BCS-160User Manual V1.6
Fig.89
●Push the feeding roller forward by hand as below first picture, at same time,
check whether the two D18 pressure rollers and D22 axle wheels as below
second picture are in full contact with each other.
If they are in full contact with each other when complete one rotation, it
indicates the assembly is in place. If there are untouched points during one
rotation, it indicates that the assembly is not in place and it may cause jamming
and splashing problem, please take down the reject pocket and install it again as
instructions until it is in place
Fig.90 Fig.91
56 / 57