BCS-160User Manual V1.6
8.6 Sensitivity Setting for QT sensor
Turn on the power switch and press "8" key to enter into SYSTEM TEST
interface.
Choose No.9 and press ENTER to enter into QT sensitivity level setting
interface. The factory default setting is level 3, means highest sensitivity. Level
1 means lowest sensitivity. Press ENTER key to save and exit level setting
interface
9. Troubleshooting
9.1 Common errors
During use of machine, sometimes you may meet some abnormal situation
and the machine cannot work normally, and the machine will display error
messages. The following sheet shows the error message, possible reason and
detailed solution. Please do trouble shooting according to the following solution.
If you can not solve the problem with the provided solution, please contact your
local distributor.
Fig.50
Fig.51
38 / 57