Advertisement
Available languages
Available languages
FRONT BUMPER
KIT PN 2878669
Applications:
All 2011 and later Sportsman 400/500/800/500 Touring/Big Boss 6x6
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
installation instructions for future reference and parts ordering information.
The contents of this kit include:
Ref.
Qty
Part Description
. . . . .1 . . . . .Front Bumper
. . . . .1 . . . . .Support
. . . . .1 . . . . .Hinge Plate
. . . . .2 . . . . .M8-1.25 X 20 mm Hex Flange Bolt
Tools Required: 3/8" and 13mm Open-end Wrench or Socket, T27 Torx Bit
IMPORTANT: Your Polaris Sportsman Front Bumper is designed exclusively for your vehicle. Please read the
installation instructions thoroughly before beginning. For your safety and to ensure a satisfactory installation,
perform all installation steps correctly and in the sequence shown. Installation is easier if the vehicle is clean and free
of debris.
Approximate Installation Time: 15 minutes
BUMPER PREASSEMBLY (ALL MODELS)
1. Assemble the support
nylock flange nuts
M8-1.25
7515163-418E
A-7515163
onto the front bumper
(finger tighten at this time).
- 1 -
Ref.
Qty
Part Description
. . . . .2 . . . . .M8-1.25 Nylock Flange Nut
. . . . .2 . . . . .1/4" nc X 2" Self-Tapping Bolt
. . . . .2 . . . . .1/4" nc X 1" Self-Tapping Bolt
. . . . .2 . . . . .Sleeve
using the
(2) M8-1.25 X 20 mm
hex flange bolts
and
(2)
Imprimé en Chine / Printed in China
Advertisement
