Advertisement
:
Unpack and identify parts.
3:
Thread 6 1/8" bolts into T-nuts on four corners.
4
Polaris Vinyl Playset Assembly Manual
2:
Place two 2x6x56" and two 2x6x73 1/2" on a
smooth, flat surface to begin. Notice floor joist
hangers.
4:
Fasten two 4x4x74" (with caps up) on one side as
shown. Fasten two 4x4x54" on opposite side. Pre-
drilled hole configuration is very important on all
4x4's. Hand tighten acorn nuts at this point. Be sure to
always place washer between vinyl and acorn nut.
Advertisement
