Advertisement
Step 9:
Fasten corner brace to swing beam and end post. Be
sure end post is plumb. Attach using six 1 3/4" washer
head screws.
Step 11:
Push bracket against 2x6 vinyl then fasten first with
two lags provided.
Swing Frame Assembly
Step 10:
Lift swing beam into position. One person should be
up in the tower. The other person should continue to
hold the end post steady.
Note: your set may not appear exactly as
pictured at this point.
Step 12:
Next predrill 7/16" holes and fasten with two 2 3/4"
bolts provided, using acorn nuts and washers.
25
Advertisement
