Advertisement
Step 5:
Fasten flange on bracket to 2x6 using two 3" lags. Be
sure inside flange is tight against inside of 2x6.
Step 7:
Finish fastening top ladder to tower using two 2 5/8"
bolts. Tighten immediately.
Climbing Set Assembly
Step 6:
Pre-drill 7/16" hole through hole on inside flange
and through 2x6.
Step 8:
Fasten ground runner 2x4 to end ladder using two 6
1/8" bolts. Tighten immediately.
29
Advertisement
