Advertisement
41:
You are now ready to finish the railing on the 7'
deck. Notice in the photo the panel with the slats
already fastened.
43:
Using 6 7/8" bolts, fasten three 2x6x56" to tower.
Two of these 2x6's will have caps on one end. This
end should be towards the 5' deck. Finger tighten
nuts.
Polaris Vinyl Playset Assembly Manual
42:
Fasten slats to 2x6 using template provided. This can
be done after the 2x6 is fastened to the tower or
before. Slat spacing is critical and is based on what
component is being added to that specific panel.
Note: Your slat spacing and opening locations may
vary based on what components you purchased with
your playset. Refer to pages 31-35 for assembly
instructions for your components. Components can
be installed anytime after the towers are complete.
15
Advertisement
