Advertisement
Step 1:
You are now ready to assemble climbing beam. To
begin, identify the main components; one top ladder,
one ground runner 2x4, and two brace 2x4's, and one
end ladder.
Step 3:
On opposite end, fasten end ladder to top ladder using
four 4 1/8" bolts. Tighten using a 9/16" deep socket
and a 9 1/6" open end wrench. Keep in mind that
over-tightening can damage the acorn nut.
28
Climbing Set Assembly
Step 2:
One one end, fasten two brackets as shown, using
four 2 5/8" bolts (this is an upside down position).
Step 4:
Flip ladder into upright position and place at desired
location on playset.
Advertisement
