YardCraft Polaris Vinyl Playset Assembly Manual page 32

Hammock Swing:
1:
Begin by identifying these parts: swivel, extra chain,
two snap hooks, and hammock.
Note: you will only need the extra chain and
hook if you install this on a position of the swing
beam instead of under the deck.
3:
If you are installing under the deck it should look
similar to this.
32
Component Assembly Instructions
2:
Install the swivel using two lags provided.
Then attach one end of chain to the snap hook.
Finish the installation by attaching the snap hook to
the swivel.
4:
If you are installing on the swing frame, it should
look similar to this