Back Light; Fixure Information - ProLights ECLIPSEHD2 User Manual

• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.

3.13 BACK LIGHT

To activate Backlight display press the button MENU so many times until shows BACK LIGHT, and press the
button ENTER to confirm.
• Press the button UP/DOWN to select ON - 10s - 20s - 30s.
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
3.14 INFORMATION
To view all the information on the device, proceed as follows:
• Press the MENU to access the main menu, then press the UP/DOWN button to select INFORMATION, then
use the ENTER button to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it
- FixHours - Through the Time Information function you can display the operating time of the
projector.
- Version - Through Software Version function you can display the currently installed software
version.
ECLIPSEHD2
12