Transport And Storage - NetterVibration NTP Series Operating Instructions Manual

Transport and storage

5 Transport and storage
Special conditions of transport are not required.
Transport
conditions
Packaging The NTP are packed and ready for assembly. Accessories and add-on
parts are delivered unmounted, unless otherwise agreed upon.
The packaging protects the NTP from transport damage. The packaging
material has been selected from an environmentally safe and technically
disposable point of view and is therefore recyclable.
The return of packaging to the material cycle conserves raw materials and
reduces the amount of waste.
• Store the NTP in a dry and clean environment.
Storage
• Protect the NTP from UV-exposures, weather and ozone.
conditions
• The storage temperature is between -20 °C and +60 °C.
• Close all openings when re-storing.
• Preserve all NTP apart from the NTP L before storage:
Inspection of If the NTP L are stored for longer than 6 months, then the NTP L must be
the NTP L
checked by
1. Add anti-corrosion oil to the air inlet of the NTP.
2. Actuate the NTP briefly when mounted.
3. Then close the supply air connections of the NTP.
Netter
Vibration before renewed start-up.
11