Transport And Storage - NetterVibration NVV Series Operating Instructions Manual

Transport and storage

5 Transport and storage
Observe the safety instructions in chap. Safety, from page 5 on.
Special conditions of transport are not required.
Transport
conditions
Packaging The NVV are packed and ready for assembly. Accessories and add-on
parts are delivered unmounted, unless otherwise agreed upon.
The packaging protects the NVV from transport damage. The packaging
material has been selected from an environmentally safe and technically
disposable point of view and is therefore recyclable.
The return of packaging to the material cycle conserves raw materials and
reduces the amount of waste.
• Store the NVV in a dry and clean environment.
Storage
• Protect the NVV from UV-exposures, weather and ozone.
conditions
• The storage temperature is between -20 °C and +60 °C.
• Hang the NVV 28 - 100 with the vibrator's nosepiece upwards and
• Before storage of the NVV 150:
10
leave the manual valve open to drain out any water or dirt.
1. Fill the housing of the NVV with approx. 60 ml of oil as shown in the
permissible operating conditions (see chap. Technical data, page 7
"Lubrication").
2. Run the NVV for 30 s.
Caution: Health and environmental risk due to escaping oil mist
3. Hang the NVV with the vibrator's nosepiece upwards and the man-
ual slide valve open to drain out any water or dirt.