Table of Contents
Advertisement
5
Transport and Storage
Check the packaging for possible signs of transport damage. In the event of
damage to the packaging, check that the contents are complete and undamaged.
IMPORTANT
If there is any damage, inform the shipping agent.
Packaging
The vacuum fixing devices are packaged
ready for commissioning. The type desig-
nation is stamped (8 VAC, VAC 10, VAC
11, VAC 12 and VAC 13) or engraved
(VAC 15 VAC 20 VAC 30 and VAC 40) on
the base plate.
When ordering a vacuum fixing device with
hose set and vibrator these components
are completely assembled, unless other-
wise agreed. Special transport conditions
are not prescribed.
Storage
Protect the vacuum fixing devices from
excessive
exposure
weathering and ozone.
The vacuum fixing devices should be
stored in boxes in a dry and clean envi-
ronment. When restocking all openings
must be closed.
to
UV
radiation,
The packaging protects the unit from
transport damages. The packaging materials
have been selected on an environmental
and disposal-friendly basis and are there-
fore recyclable.
Recycling packagings reduces raw material
consumption and waste volume.
The
storage
between -10 and +25°C. (This does not
apply to the operating temperature).
After 4 years of storage all plastic and sili-
cone components must be replaced before
using.
13
temperature
should
be
Advertisement
Table of Contents
