Transport And Storage - NetterVibration NEG Series Operating Instructions Manual

Transport and storage

5 Transport and storage
Observe the safety instructions in Ch. Safety, from page 6 on.
Please refer to the brochure for weights and dimensions.
When transporting the NEG/NEH, ensure that the NEG/NEH is not sub-
Transport-
jected to strong impacts or vibrations that could damage the bearings.
conditions
Please observe the following notes:
• Use only the transport eyelet/eyelets (1) for lifting the NEG/NEH. If the
• The pulling direction must not exceed 45°.
• Lifting tools are of the usual kind such as a pulley or a crane. When
• Handle the NEG/NEH very carefully during transport.
The NEG/NEH are packed ready for installation.
Packaging
The packaging protects the NEG/NEH from transport damage. The pack-
aging material has been selected from an environmentally safe and tech-
nically disposable point of view and is therefore recyclable.
The return of packaging to the material cycle conserves raw materials and
reduces the amount of waste.
• Store the NEG/NEH in a dry and clean environment.
Storage
• The permissible storage temperature is between -15 °C and +60 °C.
• The permissible relative humidity is max. 60 %.
• The storage time is max. 2 years.
• Do not store the NEG/NEH outdoors. The electrical components are
12
vibrator is fitted with two transport eyes, both must be used for lifting.
moving loads, use suitable steel cables or hoisting slings which are suf-
ficiently dimensioned for these weights.
not protected against corrosion.