Safety - NetterVibration NTP Series Operating Instructions Manual

Safety

2 Safety
The NTP are intended for installation in machines.
Intended use
General applications are: loosening, conveying, compacting, separating
bulk materials and reducing friction. NTP are used for emptying bunkers
and as drives for sieves and vibration tables.
The NTP may also be operated in dusty and wet environment, but not in
water or in other liquids.
The NTP B+C may only be operated clocked.
Any other use is considered improper.
Qualification Installation, commissioning, maintenance and troubleshooting of the NTP
of qualified may only be performed by authorised qualified personnel.
personnel
All handling of the NTP is the responsibility of the operator.
Falling parts
Compressed
air
Compressed air
A loosened hose which is under pressure can lead to personal injuries.
➢ Screw the hose lines on carefully.
➢ Check the hose lines and connections after one hour of operation and
➢ Retighten the hose lines, if necessary.
➢ Ensure that the compressed air is disconnected from the supply lines
➢ Prevent the NTP from being switched back on during all work.
Falling parts
The NTP, construction parts as well as fastening screws can
come loose due to vibration. Falling parts lead to severe
personal injuries.
➢ Check the fastening screws after one hour of operation
and thereafter at regular intervals (generally monthly).
➢ Retighten the fastening screws, if necessary.
➢ A safety device with a safety cable is mandatory for criti-
cal mounting situations.
thereafter regularly (generally monthly).
during all work on the NTP.
WARNING
WARNING
5