JENESIS SHS Series Manual page 7

For Burners Functioning with Gaseous Fuels
✓The pressure of the gas being fed to the burner must have an appropriate value. (For the natural gas,
this value is 21 millibars or 300 millibars.)
✓A suitable manometer should be used at a place close to the burner, on the gas inflow line of the
burner.
✓In the gas installation, a valve should be used near the burner.
✓Gas installation and connections should be checked and the gas should be opened by the gas
distribution company.
Exemple Gas Installation
ATTENTION!!! Unless your
gas line is verified officially
and opened by the gas
distribution company, your
vapor generator cannot be
activated. You must submit
your gas
certificate
activation.
opening
before
7