Battery State Indicator; Circuit Breakers; Stand-By-Mode - Monaco Cayman 2005 Owner's Manual

Table of Contents

Advertisement

The battery state indicator performs two functions. When not hooked to shore power the Battery
State indicator displays the approximate state of charge of the house batteries. When connected to
shore power or operating from the generator, the lamps indicate what part of the charge cycle the
inverter is in.
• Red = Bulk Charge
• Yellow = Accept Charge
• Green = Float Charge
Battery Charger Circuit Breaker:
The circuit breaker for the charger is located on the front of the inverter. The breaker is a re-settable
breaker in case an over current or short circuit condition occurs within the Battery Charger circuitry.
AC Out Circuit Breakers:
Two branch circuit breakers are located on the front of the inverter. One of the branch circuit break-
ers supplies AC power to various receptacles. The other breaker supplies AC power to the microwave.
The inverter may be placed in "STAND-BY" when hooked to shore power or operating from the
generator. If AC power discontinues, the inverter activates automatically. When AC power resumes,
the inverter will go back to STAND-BY mode. STAND-BY mode is indicated by the INVERT status
light flashing once every two seconds when hooked to shore power or operating from the generator.
To Enable or Disable this Feature:
• Press the INVERT button.
NOTE:
Remember to disable stand-by mode when not in use. It may run down the house bat-
teries.
Cayman 2005

Battery State Indicator

Electrical Systems - House --- Section 8

Circuit Breakers

Stand-by Mode
267

Advertisement

Table of Contents
loading

Table of Contents