Diagnostic Fault Codes - Monaco Cayman 2005 Owner's Manual

Table of Contents

Advertisement

Operation of the engine while in the limited operation mode may result in serious engine damage.
If a sudden loss of power is noticed in conjunction with the engine warning lights illuminating (STOP
ENGINE, CHECK ENGINE and WARNING), pull to the side of the road as soon as it is safely possi-
ble. Evaluate the situation.
INFORMATION:
Refer to the OEM operators manual for additional information concerning the
operation, description, maintenance, and warranty information for the engine.

Diagnostic Fault Codes

The engine ECM will record three types of fault codes; Electronic Control System Faults, Protection
System Faults and Maintenance Indicators. All faults recorded will be ACTIVE or INACTIVE. Not all
faults will light an indicator when they are ACTIVE.
Illuminated Lamps:
WARNING - Indicates a failure has occurred, but the motorhome can be operated without pro-
gressive damage. The motorhome should be serviced to diagnose the failure and repaired at the
first opportunity. The indication is not considered an emergency.
Solid RED STOP ENGINE - Indicates a major failure has occurred that can result in progressive
damage or affect safe operation of the motorhome. The motorhome should be shut down as soon
as safely possible and remain shut down until the fault can be repaired.
Flashing RED STOP ENGINE - Indicates the engine control system has started the shut down
sequence. The shut down timer will give the operator 30 seconds to find a safe stopping point.
CHECK ENGINE - Indicates the engine requires maintenance or fluids. The motorhome should
be serviced to correct the problem. If ignored, some maintenance conditions can cause improper
engine operation and even progressive damage.
To Retrieve Active Fault Codes:
1. Turn the ignition key OFF.
2. Turn the ignition key ON immediately apply three full throttle application.
3. Observe CHECK ENGINE and STOP ENGINE lamps.
a. If no active codes are recorded, both lamps will remain illuminated.
b. If an active code is recorded, both lamps will illuminate momentarily, then flash the record-
ed fault.
c. When codes are retrieved, turn OFF the Engine Diagnostic switch.
350
Section 10 --- Chassis Information
Cayman 2005

Advertisement

Table of Contents
loading

Table of Contents